Microwave-assisted combustion synthesis of ZnAl2O4 and ZnO nanostructure particles for photocatalytic wastewater treatment

ZnAl₂O₄ and ZnO nanostructure particles and in situ crystallization of zinc aluminate and zinc oxide coating layers on sintered α-Al₂O₃ and γ-Al₂O₃ granules by the microwave-assisted combustion method were investigated. For powders, the effects of solution pH value and for coated samples the influence of support type on the structure, microstructure, and photocatalytic activity of powders were studied. Results showed that variation of synthesis pH value caused to considerable change in agglomeration, specific surface area, obtaining up to 88 and 92% yields for zinc aluminate and zinc oxide nanoparticles, respectively. γ-alumina granules were more appropriate supports than the α-alumina ones because of the better photocatalytic activities and lower extent of the attritions for both zinc aluminate and zinc oxide coating layers.     

Natural Silk Film for Magnesium Protection: Hydrophobic/Hydrophilic Interaction and Self‐Healing Effect

Biodegradable implants are required in order to provide successful treatment of injuries. Temporary magnesium‐based implants with particular properties are needed in cases when it is desirable not only to maintain vital activity, but also to initiate the self‐healing process of damaged bones or tissues as well. Unfortunately, the use of magnesium alloys is limited due to the fast biodegradability of the applied material. The aim of this research is to improve the corrosion resistance of magnesium alloys by sonochemical treatment in silk solution followed by additional layer‐by‐layer deposition of natural silk on the magnesium surface. The sonication process is carried out at a frequency of 20 kHz during 5–10 min, while the duration of the silk layer deposition is 15 min. The corrosion behavior of magnesium substrates modified by natural silk layer‐by‐layer assembly is studied. Magnesium substrates sonochemically treated in silk solution demonstrate three times better corrosion resistance compared to control samples sonochemically treated in water. Additional deposition of a silk layer enhances obtained corrosion resistance by 18 times, resulting in a 54‐fold increase overall.     

Digital hysteresis sliding mode control for interleaved DC–DC converters

This paper presents a digital constant frequency sliding mode control (SMC) law for interleaved DC–DC converters. Constant switching frequency and interleaving are achieved by dynamically adjusting the hysteresis of the control signals generating comparators. The interleaving method neither imposes constraints on the number of required phases to obtain a specific output voltage nor uses quasi-SMC. Hence, the control scheme achieves high flexibility, robustness, and performance. Furthermore, a sliding mode observer (SMO) for reconstructing the inductor currents is proposed. Experimental results for a two-phase buck converter are reported. The control concept accomplishes an improved dynamic performance in comparison with quasi-SMC.     

Poly(L-lysine)-poly(ethylene glycol) layers with different structure and their influence on silica suspension stability

The effects of the structure of di- and triblock copolymers of poly(L-lysine) – LYS with poly(ethylene glycol) – PEG as well as the length of nonionic fragment in the LYS-PEG macromolecule on the copolymer chains conformation in the adsorption layer formed on the colloidal silica (SiO2) surface were examined. Spectrophotometry and turbidimetry were applied for the determination of copolymer adsorbed amounts and stability coefficients of silica aqueous suspensions. The electrokinetic parameters such as solid surface charge density and zeta potential were also estimated. The adsorption of LYS-PEG was proved to be the highest at pH 10 whereas the lowest adsorption on the solid surface was found for the triblock copolymer with long fragments of LYS at the same pH value.     

CO_2 conversion by thermal plasma with carbon as reducing agent: high CO yield and energy efficiency

A key problem in CO_2 conversion by thermal plasma is suppressing the inverse reactions,CO?+?O?→?CO_2 and CO?+?0.5O_2?→?CO_2, to simultaneously obtain high CO yield and energy efficiency. This can be done by quickly quenching the decomposed gas or rapidly taking away free oxygen from decomposed gas. In this paper, experiments of CO_2 conversion by thermal plasma with carbon as a reducing agent are presented. Carbon quickly devoured free oxygen in thermal plasma decomposed gas, and not only is the inverse reaction completely suppressed, but the discharge energy to form oxygen atoms, oxygen molecular, and thermal energy is also reused.A CO_2 conversion rate of 67%–94% and the corresponding electric energy efficiency of about 70% are achieved, both are much higher than that seen so far by other plasma implementations.     

羊场湾煤矿软岩底板炉渣混凝土加固技术

为提高软岩底板强度而供无轨胶轮车等大型车辆行驶，结合羊场湾煤矿16206机巷软岩底板地质条件，研究了炉渣混凝土底板加固技术，确定了合理的配比方案，并对机巷现场进行混凝土地坪铺设应用。研究与应用结果表明：炉渣混凝土底板强度可满足大型车辆连续运输所需，极大地提高了底板承载能力，防止底鼓，为长距离巷道实现连续运输提供了基础保障。     

电化学反应器隔膜材料的分子设计与介尺度策略

电化学反应器中隔膜材料是将正极和负极在电子通路上隔开但在离子传输通路上保持畅通的特殊材料。作为电化学反应器三个关键材料之一，隔膜材料还需耐强酸/强碱和高电压等环境。围绕电化学反应器中隔膜材料，从分子设计的角度针对材料电化学性能与化学稳定性的调控、电化学装置的介观传质性能的促进和改善等研究思路与进展进行了综述，为相关研究提供性能导向的分子设计参考。     

高性能三水醋酸钠-尿素-膨胀石墨混合相变材料的制备及其在电地暖中的应用性能

采用尿素调节三水醋酸钠的相变温度到合适范围再添加膨胀石墨来降低过冷度，研制了高性能的三水醋酸钠-尿素-膨胀石墨混合相变材料，并对其在电地暖中的应用性能进行了研究。结果表明，当尿素质量分数为36.5%、膨胀石墨添加量为4%(质量)时，所得混合相变材料的熔化焓高达209.1 J/g，熔点在31.98℃，过冷度仅为2.04℃，热导率为2.349 W/(m·K)，热可靠性良好；将用该混合相变材料制成的相变板安装在实验房的电地暖中时，实验房的热舒适度随着相变材料层厚度的增加而增加，但也带来加热时间和用电量的增加；当相变材料层厚度为10 mm时，电加热温度适宜设置在45℃；在热舒适度相当的条件下，有相变板的实验房与无相变板的参比房相比具有用电量小及电费低的优势。     

An Improved Torque Sensorless Speed Control Method for Electric Assisted Bicycle With Consideration of Coordinate Conversion

In this paper, we propose an improved torque sensorless speed control method for electric assisted bicycle, this method considers the coordinate conversion. A low-pass filter is designed in disturbance observer to estimate and compensate the variable disturbance during cycling. A DC motor provides assisted power driving, the assistance method is based on the real-time wheel angular velocity and coordinate system transformation. The effect of observer is proved, and the proposed method guarantees stability under disturbances. It is also compared to the existing methods and their performances are illustrated through simulations. The proposed method improves the performance both in rapidity and stability.      

贾燕1,赵永涛2,张红松2

为确定ZrO2/莫来石热障涂层的单层最佳厚度,采用有限元技术研究单层厚度对ZrO2/莫来石热障涂层热冲击应力的影响。结果表明,莫来石层厚度为0.25mm时,涂层表面及ZrO2/莫来石界面处具有最大热应力,而其它莫来石层厚度时涂层内部热应力则受莫来石层厚度影响不明显。当ZrO2层厚度为0.3mm时,ZrO2/莫来石涂层中的热应力在整个横向距离范围内保持稳定,而其它情况下涂层中的热应力则与ZrO2层厚度成正比。涂层表面处的径向热应力大于ZrO2/莫来石界面处的对应值。